Saturday, September 21, 2013

Counter Reset Canon PIXMA iP3680 Printer

This is the manual guide on how to reset your Canon Pixma Ip3680 printer.
Hardware Reset: Entering Service Mode
You have to enter in service mode in order to used the resetter. To do that follow  the following procudre
  • Turn off the printer without pulling the power cords
  • Hold down RESUME button and press Power button
  • Keep holding down Power button and let RESUME button go
  • Then Press RESUME button twice then let BOTH buttons go
  • You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.
Software Reset: Using the Resetter
After you download the resetter, extract it and double click "iP3680.exe"
  • Click Reload Button and you will get a new USB port
  • Load some papers in your printer and press the "Main" Button once, wait until the printing is done
  • Then press "EEPROM Clear" button to clear EEPROM
  • Then press EEPROM button and the printer will print some text
  • Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again.
 Download Canon Resetter

No comments: