Saturday, September 21, 2013

Printer Reset Brother MFC-J265W and MFC Series

Follow the guide below to reset the purge counter of Brother MFC-J265W
  • Unplug the power cable
  • Hold down the "Start" button
  • Without release the "Start" button, connect the power cable
  • When "Maintenance" appears on the screen, release the "Start" button
  • Enter 80 with the numerical keypad
  • With down button go to the purge counter: "Purge00xxx"
  • Enter 2783 with the numerical keypad
  • Press on "Stop/Exit" to go back in Maintenance mode
  • Enter 9 and 9 to quit the Maintenance mode

The solution above are also available for the following  Brothers MFC printers
  • MFC-210C, MFC-215C, MFC-235C, MFC-260C, MFC-240C, MFC-250C, MFC-255CW, MFC-295CN, MFC-297C
  • MFC-3240C, MFC-3340CN, MFC-3342C, MFC-3360C
  • MFC-410CN, MFC-420CN, MFC-425CN, MFC-440CN, MFC-465CN, MFC-490CW
  • MFC-5440CN, MFC-5840CN, MFC-5460CN, MFC-5860CN, MFC-5490CN, MFC-5890CN, MFC-5895CW,
  • MFC-620CN, MFC-640CN, MFC-640CW, MFC-660CN, MFC-665CW, MFC-680CN, MFC-6490CW, MFC-6890CDW
  • MFC-790CW
  • MFC-820CW, MFC-845CW, MFC-885CW, 
  • MFC-990CW, 
  • MFC-J220, MFC-J265W
  • MFC-J410, MFC-J415W, MFC-J430W
  • MFC-J5910DW
  • MFC-J615W, MFC-J625DW, MFC-J6510DW, MFC-J6710D, MFC-J6710DW, MFC-J6910DW, 
  • MFC-J825DW

5 comments:

Unknown said...

I have MFC-J5910DW Printer and it is come With Germany Language
And I Want To Change it To English
but through menu there is no option there for changing language but i heard you can change the language from maintenance Mode
So Please Guide Me With Detail To change the Language of The Printer

Prem said...

My printer mfc j430w keypad not working always show ink absorber full

Prem said...

My printer mfc j430w keypad not working always show ink absorber full

Anonymous said...

This is genius! If looked for soooo long and found so much trash ! I have a MFC j430w and this actually worked ! Thank you very much ❤️

Anonymous said...

Thank you! These were the exact steps I needed to resolve the error.